An assembled High-efficiency Quad-cell Electrolyzer. Complete kit. This is for the cell, bubbler, 1.5 quart reservoir, hose, fittings and wiring kit. This is the MOST EFFICIENT hho electrolyzer out there with an efficiency of 3-4 liters per minute production.
We are the first and original here with the dry cell. See our feedback!!!
Our cells have 50% thicker gaskets than the others here on ebay. Our gaskets are .090″(3/32″) neoprene gaskets not the thin .060″ neoprene gaskets that almost all the other dry cells have. A thicker gasket is more desirable in order to keep more electrolyte between the plates for a more efficient and cooler operating cell as well as less potential for leaks and a better dielectric property than the thin .060″(1/16″) gaskets. The gaskets are cut to enhance the gas flow and to keep the plates submersed in the electrolyte for the most efficiency from the 316 stainless steel plates as possible.
Our endplates are Marine grade hdpe. This is far superior and stronger than the standard hdpe end plates.
- Made of the finest polymers available, using the
proprietary K-Stran process for superior flatness
and consistency. The most advanced manufacturing process available. - Environmentally stabilized for harsh heat and tough environments.
- Has passed the Federal Motor Vehicle Standard 302 fire
test required for use in motor vehicles. - The kit includes an assembled Liberator quad-cell elyctrolyzer with 25- 4″ X 5″ 316L stainless steel plates, electrolyte container, 7.5″X2″ clear bubbler, 10 awg wiring harness with relay, switch, fuse holder and electrical connectors. 10′- 1/2″ X 3/8″ clear vinyl tubing, fittings, hose clamps and check valve.
Kit contents:
- 1- assembled 25 plate 316L stainless steel Liberator quad-cell electrolyzer. Plate configuration -nnnnn+nnnnn-nnnnn+nnnnn-.
- Size-6.3″ X 5.3″ X 4″
- 1- 1.5 quart electrolyte container/bubbler with screw cap and fittings.
- 1- Clear 7.5″ X 2″ clear heavy duty SCH40 bubbler with drain plug.
- 5- 15″ 10 AWG wire leads w/heat shrink electrical connectors.
- 1-10′ 1/2″ X 3/8″isd clear vinyl tubing.
- 1- 30-40 Amp Wiring Kit (16 & 10 AWG wire, fuse holders, fuses,switch, relay, heat shrink connectors, terminals, splices and diagram).
- 1- 3/8 barb check valve.
- 6- Snap Grip acetal hose clamps (secures tubing in second).
- 7- 1/4″npt X 3/8″ hose barbs
- 2- 1/4″npt plugs
Be the first to review “25 PLATE HHO HYDROGEN GENERATOR SEALED DRY CELL KIT”